We have to do some modifications for finish this chapter and verfy the installation.
Check the network:
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 52:54:00:E5:5E:77
inet addr:10.15.33.2 Bcast:10.15.33.255 Mask:255.255.255.0
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 52:54:00:78:9A:1F
inet addr:10.15.34.248 Bcast:10.15.34.255 Mask:255.255.255.0
Check the route:
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.15.34.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.15.33.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1
0.0.0.0 10.15.33.1 0.0.0.0 UG 0 0 0 eth0
The default route is pointing at the Inner Network, thus this node won't connect internet, we have to correct this via Route modification.
Modify the sysconfig's network configuration:
# vim /etc/sysconfig/network
- GATEWAY=10.15.33.1
+ GATEWAY=10.15.34.1
Reboot and test it via ping:
# ping mirrors.aliyun.com
PING mirrors.aliyun.com (115.28.122.210) 56(84) bytes of data.
64 bytes from 115.28.122.210: icmp_seq=1 ttl=50 time=52.4 ms
64 bytes from 115.28.122.210: icmp_seq=2 ttl=50 time=52.9 ms
Now our WolfHunter Root Node is ready for Cobbler server setup.